additivecompareIndustrial FFF benchmark

Vision Miner 22 IDEX V4

An open-material IDEX FFF printer with a 350 × 350 × 450 mm build volume, a 500 °C nozzle and an actively heated chamber up to 100 °C. Qualifies for ASA, PC, PA-CF, PPS-CF, PEI 9085, PEKK and PEEK.

Open material ecosystemIDEXHeated chamber

Specifications

Build envelope350 × 350 × 450 mm
Build volume55.1 L
Max nozzle temperature500 °C
Chamber100 °C, actively heated
Max print speed500 mm/s (manufacturer claim)
Exterior size535 × 568 × 739 mm
Exterior volume225 L
Envelope efficiency24.5 % (build ÷ exterior volume)
Material ecosystemOpen material ecosystem
Independent dual extrusionYes
Continuous fiberNo
Price  Tier 4 of 5 · About $14,900 (List price, Dynamism)
StatusCurrent

High-temperature IDEX built for PEEK, PEKK, PEI (ULTEM 9085 and 1010) and PPSU. 500 °C hotends, a 200 °C bed and an actively heated chamber rated to 100 °C. Speed figure is maximum travel. Weighs 90.7 kg.

Open in the trade-off mapSee it in the full table

Material qualification

MaterialStatusHeadroom
ASA / ABSNozzle ≥ 250 °C, chamber ≥ 45 °CQualifiedNozzle +250 °C, chamber +55 °C
Polycarbonate (PC)Nozzle ≥ 270 °C, chamber ≥ 60 °CQualifiedNozzle +230 °C, chamber +40 °C
Nylon CF (PA-CF)Nozzle ≥ 280 °C, chamber ≥ 50 °CQualifiedNozzle +220 °C, chamber +50 °C
PPS-CFNozzle ≥ 320 °C, chamber ≥ 90 °CQualifiedNozzle +180 °C, chamber +10 °C
ULTEM 9085 (PEI)Nozzle ≥ 360 °C, chamber ≥ 90 °CQualifiedNozzle +140 °C, chamber +10 °C
PEKKNozzle ≥ 360 °C, chamber ≥ 90 °CQualifiedNozzle +140 °C, chamber +10 °C
PEEKNozzle ≥ 400 °C, chamber ≥ 100 °CQualifiedNozzle +100 °C, chamber +0 °C

How qualification works

Sources

Verified October 31, 2026. Spot an error? Email data@additivecompare.com with a source.

Other printers in price tier 4 ($8,000 to $20,000)

PrinterBuild volume (L)Nozzle (°C)Active chamber (°C)Exterior (L)Price tier
Flashforge Creator 4 DiscontinuedOpen material ecosystem · IDEX 7036065567
UltiMaker S7Validated material ecosystem 23.8280—232