Find the FFF systems that can actually process your material
Set a target polymer and the plot shades the region where its thermal requirements are met. Put any two specs on the axes. The dashed line is the Pareto frontier: machines that no other model beats on both axes at once.
Open materials
Validated
Closed
IDEX
Pareto frontier
Meets target
Can't run target
| Shortlist | System | Volume (L) | Nozzle (°C) | Chamber (°C) | Speed (mm/s) | Exterior (L) | Efficiency (%) | Material system | Price tier | PEI 9085 fit |
|---|---|---|---|---|---|---|---|---|---|---|
| 22 IDEX V4 Vision Miner · IDEX |
55.1 | 500 | 100 | 500 | 225 | 24.5 | open | Qualified | ||
| Plus 4 Discontinued Qidi Tech |
26 | 370 | 65 | 600 | 135 | 19.3 | open | Marginal | ||
| Creator 4 Discontinued Flashforge · IDEX |
70 | 360 | 65 | 200 | 567 | 12.3 | open | Marginal | ||
| FX20 Markforged |
84 | 360 | 200 | n/p | 2,296 | 3.7 | closed | Qualified | ||
| X1E Bambu Lab |
16.8 | 320 | 60 | 500 | 69 | 24.3 | open | Nozzle too cold | ||
| SV08 Sovol |
42.3 | 300 | — | 700 | 170 | 24.9 | open | Nozzle too cold | ||
| K1 Max Creality |
27 | 300 | — | 600 | 106 | 25.5 | open | Nozzle too cold | ||
| E2 Raise3D · IDEX |
19 | 300 | — | 150 | 168 | 11.3 | open | Nozzle too cold | ||
| Pro3 Plus Raise3D |
54.5 | 300 | — | 150 | 429 | 12.7 | open | Nozzle too cold | ||
| Epsilon W50 BCN3D · IDEX |
50.4 | 300 | — | n/p | 329 | 15.3 | open | Nozzle too cold | ||
| XL (5-tool) Prusa Research |
46.7 | 290 | — | n/p | 454 | 10.3 | open | Nozzle too cold | ||
| S7 UltiMaker |
23.8 | 280 | — | n/p | 232 | 10.3 | validated | Nozzle too cold | ||
| F370 Stratasys |
32 | n/p | n/p | n/p | 999 | 3.2 | closed | Not in vendor catalog |
Specifications verified October 31, 2026; “n/p” means the manufacturer doesn't publish the figure. Material requirements are typical processing guidance, so confirm against the filament supplier's datasheet. Closed systems qualify only for materials in the vendor's own catalog. Speed is a manufacturer claim, not normalized throughput. How the comparison works.